基于多智能体仿真的自动化集装箱码头合理通过能力研究

针对自动化集装箱码头泊位合理通过能力评估问题,基于多智能体仿真建立采用"双小车岸桥(DTQC)+自动导引车(AGV)+自动化轨道吊(ARMG)"工艺的自动化集装箱码头装卸作业模型,对顺岸布置的自动化码头通过能力与码头服务水平、泊位数量之间的关系进行研究。仿真结果表明:码头服务水平(AWTAST)与泊位通过能力呈明显负相关关系,且在一定码头服务水平下,泊位合理通过能力随顺岸式码头泊位数量的增加显著提高。基于仿真结果进行公式拟合,提出了自动化集装箱码头的泊位合理通过能力估算方法,可以为自动化集装箱码头规划与运营提供决策支持。     

考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

基于HHT和BP神经网络的船舶电力系统故障定位

针对船舶电力系统故障难以精确定位的情况,将Hilbert-Huang变换(HHT)和BP神经网络应用于船舶电力系统故障节点定位。首先,采集各节点电流信号,经过EMD分解得到若干IMF分量,对第一个IMF分量进行Hilbert变换得到其瞬时振幅向量。然后,将各节点的瞬时振幅向量之和作为电流信号的特征量输入到带有动量因子的BP神经网络中进行训练,利用训练好的神经网络进行故障节点定位。最后,通过仿真实验验证了所提方法的有效性。     

Sustainability and interactivity between cities and ports: a two-stage data envelopment analysis (DEA) approach

Ports and cities are intrinsically linked. Port city, which serves as a link between the local and global economy, is an integration of both urban and port systems. Constrained by different regional structures, port cities have developed various formulations over time. Using a two-stage data envelopment analysis (DEA) approach, this paper proposes a new method for measuring the sustainable development of different port city systems. While the previous empirical studies often separate the port system and the urban system, this paper assesses the two systems in an integrated way. Moreover, this paper develops a systematic methodology for measurement of sustainability. Twenty world-leading container port cities are selected for this study using contemporary data. The DEA results display their relative differences in levels of sustainable development, which reveal the effectiveness of the prevailing policies in them. Eventually, recommendations are drawn for other port cities by referring to the best practices.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

路面热再生技术在养护施工中的推广意义

本文通过对公路养护工程具体施工方式的研究,简明扼要的分析了热再生技术在施工现场的施工方式。大量工程实际经验总结得出,路面的现场热再生技术可以大大提高原有路面沥青材料的利用率,提高经济效益的同时,资源得到了重复利用,且由于热再生技术在施工时,不会对环境造成影响,故而该技术的推广更有利于环保。     

隧道照明节能控制系统研究

综合考虑交通量、环境亮度、行车速度、地理环境等因素,基于隧道照明设计与控制的"全局优化"理念,采用"多模式、多等级、智能化、个性化"的控制策略,开发了能够根据公路隧道内外亮度、照度、车流量、车流特点等环境变换因素,自动进行反馈调整隧道内部照明的智能照明控制系统。估算比对同一隧道在使用节能智能控制系统前后年总能耗可知,与原有控制方案相比,节能智能控制系统综合节电30%。     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Recursive least squares algorithm for a nonlinear additive system with time delay

This paper proposes a recursive least squares algorithm for a nonlinear additive system with time delay. By the Weierstrass approximation theorem and the key term separation principle, the model can be simplified as an identification model. Based on the identification model, a recursive least squares identification algorithm is used to estimate all the unknown parameters of the time-delayed additive system. An example is provided to show the effectiveness of the proposed algorithm.     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。